Amplifier Harness, 2PCS Amp Adapter Wiring Harness Compatible with C7 2014-2019, Car Stereo Amp Connector Cable

Item Type: Amplifier Adapter Kit
Material: Plastic
Fitment:
For C7 2014 to 2019
Fits vehicles too as the amps are all very similar.

Installation:
Amplifier Location: Wire harness plugs into your amplifier instead of behind the radio. Some known amplifier locations are as follows:
Spare tire area, left side.
Back wall, center right side
Behind glove box
For C7- Rear trunk storage compartment
Wiring: T harness includes power and ground for the amplifier, as well as 3 channel outputs. Each car will only use 2 channels, but it is important to have all 3 channels on the harness as other model vehicles may use channels that your car does not use. One set per application will not be used.

Wire colors:
For C7
Gray wire = not used, green wire = right front door, white wire = left front door. Solid is +, Black stripe is -
Gray wire = right front door, white wire = left front door, green wire = mono subwoofer. Solid is + (positive), Black striped is - (negative)

Product Description: A very valuable tool for adding a subwoofer tovehicles with stereo systems. This will save you a lot of time and hassle. No need to risk cutting or tapping into the sensitive wires of your car or buying expensive aftermarket modules. Simply plug our harness into the main plug on the Amp in your vehicle (diagonal fin). Please note that since systems are digital, there is no available 12v switched power to turn on the new amplifier. The signal from the harness is also high level. Therefore, you will need to use a processor or LOC with high level signal sensing inputs to process the signal and turn on the amplifier. Please note that while all amplifiers are very similar, the output channels may vary slightly depending on the vehicle. The labels on the harness are specifically setup for vehicle. For any other vehicle, ignore the label, the