Carpet Extractor Machine 40L 3 in 1 Stainless Steel Carpet Cleaning Machine for Sofa Cleaning 110V 1000W

This machine is for carpet cleaning and can make wet and dry cleaning. It can make spraying, washing and drying at the same time during the work process.

Product Parameters

Voltage: AC110V 50/60Hz

Power: 1000W(1.3HP)

Power of the water pump: 36W(DC12V)

Steel drum capacity: 10.6 us gal(40L)

Water tank capacity: 2.6 us gal(10L)

Steel drum height: 35.0"(89cm)

Steel drum diameter: 13.2"(33.5cm)

Hose length: 8.2ft(2.5m)

Length of the power cable: 23.0ft(7m)

Interface caliber: 1.57"(4cm)

Vacuum suction: 0.023Mpa(230mbar)

Air flow rate: 11.6gal/s(53L/S)

Mode of cooling: Cycle air-cooled

Pressures: 87PSI

Big water sucker width: 9.84"(25cm)

Little water sucker width: 3.35"(8.5cm)

The host of net weight: 36.4LB(16.5kg)

Attention:

1. The dust collection bag must be removed from the machine before using the water spray and water absorption function.

2. Before using the water spray and water absorption function, 15ml-25ml defoamer must be added to the water tank (the machine head needs to be opened).

3. Liquid temperature in water tank shall not exceed 50℃.

4. When the cleaning operation is completed, be sure to put the water suction pipe in the water tank into the water to continue to run for 20-30 seconds, in order to flush the water pump and pipe residual detergent, ensuring this machine can be used normally in the next time.

5. After everything is ready, start the machine water spray function, press the water spray switch until there is water spray before use. If the machine you just received does not spray water after starting, hold down the spray valve and wait patiently, the pump needs some time to drain the air from the water pipe.