Ultimate Washer UW11-PW4480 Muck Scupper Turns a Pressure Washer into a Trash Pump, Compatible with ST-36
Maximums: 4000 PSI, 36 GPM – 86 GPM water flow, Capable of Extracting Water, sludge, gravel Vertically up to 20 FT
4.0 Noz
-
Detail
- Higher the GPM of your pressure washer, the higher the vertical lift (water up to 24FT max) - Converts Your Pressure Washer into a High-Volume Water Pumps for Water/Sludge Removal - The base unit attaches to the end of a pressure washer lance with a quick coupler for extension to the bottom of the pit. Uses a 0 tip for suction/power ejection. - Can Also Be Used as Sump Pump to Remove Mud, Paint, or Chemicals Without Damaging Your Pump - All Substances Run Through the Tip of Your Attachment, Not Through Internal Parts of Your Machine - Other Applications Include Cleanout of Car Wash Sump Pits, Drains Fountains or Pongs. - 2 GPM Minimum Flow Needed - Vacuums Up Liquid Slurries at a Ratio of about 1:11 (Example: Using 4 GPM will produce and output of 44 GPM) - The Sludge Scupper uses the pressure from the machine to create a suction effect for the pumping out of any body of water. It is a very cheap alternative for pumping volumes of water or liquid matter up to 5,160 gallons per hour. Due to the nature of the mechanism of suction it can be used to suck practically any type of liquid and has no working parts that require maintenance. It can also be used to refill a mobile tank that supplies the pressure cleaner from a source such as a reservoir or dam.
-
Customer ReviewsNo comments