212CC Gas Powered Trash Water Pump, 7.5HP 4-Stroke Engine Gas Powered Water Pump with Hose Kit High Pressure Transfer Pumpfor Irrigation from Lake, Pool Draining (2 inch)

This gas engine water pump is mainly crafted from top-quality cast iron and aluminum alloy and adopts a high-performance 4-stroke engine with 212cc displacement, offering superior power, efficiency, and durability. Whether you are seeking to supply water to the farmland, irrigate lush vegetation, or extinguish fires, this marvelously constructed device will surely come to your aid and exceed your expectations.

How to Operate

1. Lay the machine flat and fill it with oil (not included) until just a little oil overflows, as too much or too little oil will affect operation.

2. Add #90 or higher gasoline (not included).

3. Fill the pump head section with water until the water overflows from the outlet.

4. Toggle the red flameout switch to the "ON" position.

5. Adjust the throttle switch and air vent switch to the left and the fuel line switch to the right.

6. Pull a small section of the puller cable out first, and then pull the puller quickly to start the machine.

7. Finally, connect the water inlet and outlet.

The product can be used for farmland watering, garden irrigation, greenhouse planting, ground cleaning, fast drainage, water collection, swimming pool water exchange, prairie fire fighting, and so on.

Notes

• Please change the oil after the first use of 5-10 hours, otherwise, the impurities in the oil during the break-in period will seize the crankshaft.
• Please use the correct model, genuine, and clean engine oil. Please add unadulterated 90# gasoline or above to the fuel tank of the machine, add oil to the tank, and check the oil level before each use. We recommend that you use unleaded gasoline for the optimal performance of your product.
• When the gasoline engine is working continuously, the crankcase temperature should not exceed 90°C. When heating, it should be shut down for 15-20 minutes before continuing to work, and when adding gasoline, it must be cooled down before proceeding.

The product is made of high-quality cast iron and aluminum alloy, making it solid and durable, so it can adapt to difficult environments, such as in the mountains or forests, and can keep beautiful and practical for a long time.

Ignition ModeNon-contact Transistorized IgnitionFuel Tank Running TimeAbout 5 hoursGasoline Type90# and above(Not Included)Emission Control DurabilityAbout 600 HoursFactory Intensive Test TimeAbout 1000 HoursWorking Temperature -5°-40°C/23°F-104°FMaximum Power4KWMaximum Torque(N.m/r/min)12/250Output Speed3600r/minDisplacement212ccFuel Tank Capacity3.6L/0.95GalOil Tank Capacity0.6L/0.16GalLift26m/85.3ftSuction Distance8m/26.25ftFlow Rate1000L/264Gal/minOutlet Caliber50mm/2"Inlet Caliber 50mm/2"Hose Length7.5m/24.61 ftProduct Size49*37.5*40.5cm/19.29*14.76*15.95inchPackage Size50.5*38.5*43cm/19.88*15.16*16.93inGross Weight21kg/46.3 lbsNet Weight17kg/37.48 lbs

Application

High Quality Material