JHS Pedals JHS Buffered Splitter Guitar Signal Path Effect & Active A/B/Y Stereo Output Switcher Guitar Pedal

JHS Pedals JHS Buffered Splitter Guitar Signal Path Effect
There are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.

JHS Active A/B/Y Stereo Output Switcher Guitar Pedal
The JHS Pedals active A/B/Y is the perfect solution when you need to send one signal to two outputs with the ability to choose either output (or both) on the fly. Just plug in your instrument cable (or patch Cable) into the input, then use the outputs to send signal to any combination of amplifiers, interfaces, mixing board, or anywhere else you want to send your signal. Once hooked up, use the left footswitch to select between a and B channels. When the led is red, the A channel is engaged. When the led is Green, the B channel is engaged. Hit the right “Y” footswitch, and both channels are engaged for full stereo output. Because the active A/B/Y has an output transformer on one of the outputs, there is no need for a ground lift as the transformer eliminates any hum. With an output transformer, FET transistors for completely silent switching, the capability to use one or both outputs simultaneously, The JHS Pedals active A/B/Y will be the one pedal that you can never leave home without!.