CNCEST Professional Chainsaw Saw Chain Rivet Spinner Repair Tool,Chain Saw Link Breaker

llust. C-D:

Step 3. Slide cam (2) out right side of chain breaker unit. (Ilust. E)

Step 4. Reinsert cam (2) into opposite side of chain breaker unit. Depress punch holder (6) and insert

cam. (llust. F)

Step 5. Replace plastic cap (5) and reinsert handle (1). Tighten set screw (3) with Allen wrench (4).

Step 6. Remove stop pin (10) from right side of unit and reinsert into left side. (llust. G)

*REPLACING PUNCH

Step 1. To remove worn or damaged punch (9), loosen set screw (7) with Allen wrench (4). (llust. H)

Step 2. Insert new punch (9) into punch holder(6) (push punch up until fully seated). Tighten set screw

(7). (lst.)

Instructions:

HOW TO BREAK CHAIN

Step 1. Insert chain portion to be broken into the slot of the adjustable anvil(llust. J)Tighten

adjustment knob until chain is securely positioned. Position cutter as shown.( llust.K) IMPORTANT:

It is not necessary to re-adjust anvil when breaking multiple loops of chain of the same chain type.

Step 2. Position rivet head directly under punch and pull handle (1) down just far enough

to push rivet out (do not use excessive force). (llust. L)

Operating Istuctins:

HOW TO SPIN RIVETS

Step 1. Lay chain across plastic chain supports (8) (lust, C)

Step 2. Rotate plastic chain supports (8) so that the rivet head is centered between the take-up handle pocket

(6) and spinner anvil (5). (lust. C)

Step 3. Turn take-up handle (6) until chain is secured against spiner anvil (5). (lust D)

Step 4. Tum sinner crank (1)a few times t0 center the rivet hub in the spinner anvil (5). (lust. E)

Step 5. Apply a few drops of oil to rvethub. (lust. F)