68cc 2-Cycle Gas Chainsaw 18Inch Gasoline Powered Chainsaw Handheld Anti-vibration System Gasoline Chain Saw Kits for Cutting Wood Outdoor Garden Farm with Tool Kit Thicken the Brake Handle USA STOCK

Product Parameters:

Guide Plate Size: 18 Inches
Bore * Stroke: 58 * 34mm (2.28 * 1.34 in)
Weight: 6.5kg (14.3lb)
Rated Power: 5.0kw/3.6hp
Mixed Oil Ratio: 25:1 (Gasoline 25, Engine Oil 1)
Engine Specification: 68cc
Maximum Working Speed: 13000r / Min
Chain Oil Tank Volume: 260ml
Fuel Tank Volume: 550ml
Maximum Cutting Diameter: 20 "(55cm)
Exhaust Volume: 7.2 (Cm3)
Sawing Productivity: 50 (Cm2 / S)


Operation:

1. Turn on the Start Switch
2. Open the Air Door Switch
3. Pull the Starter a Few Times Until You Hear "Bang Bang"
4. Close the Damper
5. Press up and down at the Same Time
6. Pull the Throttle Switch of the Pull-down Rope Again to Start Successfully


Attention:

The Main Function of Adding Engine Oil Is to Lubricate the Chain, so You Must Wait for the Engine Oil to Spray out Before You Can Operate the Saw Tree. the Dry Saw Will Cause Great Damage to the Chain (Ordinary Engine Oil Is Enough)
Add Gasoline, the Mixture Ratio of Gasoline and Engine Oil Is 25:1 (It Must Be 2t Two-stroke Engine Oil)
2-Stroke Engine Oil Must Be Used When Adding 2-Stroke Engine Oil at a Ratio of 25:1. 4-Stroke Engine Oil or Other Engine Oil Must Not Be Used, Otherwise It Will Easily Lead to Cylinder Pulling or Other Problems
Add More than 90 Gasoline, Gasoline and Two-stroke Engine Oil to the Same Scale, Close the Cover, and Shake It Upside down to Add It to the Fuel Tank


Packing List:

File + Installation Wrench + Slotted Screwdriver + Internal Single Angle Wrench

This Is an Upgraded Model That Does Not Require Manual Brakes. It Is Automatically Controlled by the Engine Throttle and Can Be Used When It Is Installed, Without Chain Brakes.