Rockville SK58 Package 8" 800w Loaded K5 Car Subwoofer Enclosure+DB10 Amplifier, 4 Ohm, Deep Bass, Compact Design, Easy Installation, for Car Audio Enthusiasts

Loaded Sub Enclosure Features:

• Rockville Single 8" K5 800w Car Subwoofer Pre-loaded In Vented Sub Enclosure
• Peak Power Handling: 800 Watts
• Program Power Handling: 400 Watts
• CEA Rated RMS Power Handling: 200 Watts
• Final Impedance: 4 Ohm, ¾” MDF enclosure
• Bonded stapled and braced, Computer designed vents
• Angled at 15 % for perfect bass alignment
• High quality aviation grade tweed carpet
• Satin Nickel speaker wire push terminals
• Enclosure air space is 0.6 Cu Ft per sub
• Vent dimensions (inches): 1.25" x 4.75" x 7"
• Tuning frequency of enclosure: 37 Hz
• 1.5"4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
• The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
• 30 Oz High Quality Magnet, Cast IronBasket With Black Sanded Finish
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
• Blue Stitching Cone Reinforcement Ensures Long Life, Polypropylene dust cap
• Gold-Plated spring loaded push terminals, Impedance: Single 4-Ohm Voice Coils
• Vented Hole on T-yoke Enhances Heat Dissipation
• Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight
• High BL Magnetic Motor Gap
• High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
• Cutout Diameter: 7.16 inches, Mounting Depth: 3.54 inches
• Frequency Response: 37 Hz - 1.3K kHz
• 5mm T-Yoke + 5mm Washer, Sensitivity: 85.7dB
• Sealed Enclosure Volume: 0.35 – 0.85 Cubic Feet
• Vented/Ported Enclosure Volume: 0.6 – 1.2 Cubic Feet
• Weight of enclosure: 23.1 Lbs., Dimensions of enclosure: 14.25“ x 10.75" x12"

Features of Amplifier:

• Rockville dB10 800 Watt/400 Watt RMS Mono Class-D 4-Ohm Amplifier
• CEA Compliant Power Rating @ 4 Ohm: 200 Watts x 1 Channel
• RMS Power Rating @ 4 Ohm: 400 Watts x 1 Channel
• Peak Power Rating @ 4 Ohm: 800 Watts x 1 Channel
• High-Speed MOSFET Power Supply
• Minimum THD at Rated Power: <0.1%
• S / N Ratio: >90dB
• Under Voltage Protection: 10V
• Over Voltage Protection: 16V
• Frequency Response: 15 Hz - 250 Hz
• Damping Factor: >60 @ 100Hz
• Optical Coupler Class “D” Technology
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter: 50 Hz - 250 Hz
• Subsonic Filter: 15 Hz - 55 Hz
• Phase Control
• Full IC-Controlled Protection Circuitry
• Fully Adjustable 12dB Bass Equalizer
• Mute and Delay Soft Start System
• Status Mode LED Indicator
• 25 Amp ATO Fuse
• Product Dimensions: (L x W x H) 7.7" x 5.5" x 2.0"
• Product Weight: 4.4 Lbs.

Features of wire kit:

• Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• (1)17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17 8 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3 8 Gauge SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Rockville SK58 PACKAGE 8" 800w Loaded K5 Car Subwoofer Enclosure+DB10 Amplifier