Home / Envig Digital Drinking Water Tester | TOC, COD, TDS & Temp 4-in-1 | Organic Contamination (Algae, Chemical, VOC etc.) | Lab Grade | Well, Tap, Aquarium & Outdoor Water Quality

Envig Digital Drinking Water Tester | TOC, COD, TDS & Temp 4-in-1 | Organic Contamination (Algae, Chemical, VOC etc.) | Lab Grade | Well, Tap, Aquarium & Outdoor Water Quality

Best Testing Coverage --- With so many things that can be tested in your drinking water, it can be overwhelming and expensive to choose a lab test. Use this water quality meter to give you the direction in a tiered approach. It covers overall contaminant levels not only related to inorganic matters
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Envig comes from the Southeastern United States. Ever since its early specialty in ultraviolet technology, Envig has dedicated itself to the life-essential need in getting clean water.

    With all three readings well related and covering different areas of contamination concerns, performance of a RO or other filter system is unmistaken and manifested. Comparison becomes easy. It also helps to identify time and circumstance of filter change or other maintenance.

    • Test on unusual drinking water sources
    • Tracking of water quality changes

    Dimension6.5" x 0.75" x 0.83" (165 x 19 x 21mm)Weight2.9 ozOperating Temp50 – 104 °F / 10 – 40 °CBattery (not included)2x AAA

    Detection Range (unit: mg/L)

    TOC: Detection Range: 0-10, Max Error: 10%FS, Reading Resolution: 0.1

    COD: Detection Range: 0-10, Max Error: 10%FS, Reading Resolution: 0.1

    TDS: Detection Range: 0-1000, Max Error: 10%FS, Reading Resolution: 1

    TEMP: Detection Range: 0-80°C, Max Error: +/-0.5°C, Reading Resolution: 0.1°C

    What's in the Box

    Water quality meter (2 AAA battery not included), user manual.

    FAQ

    I get readings that are apparently wrong.

    If there is even tiny bubbles attached to the detector head, it will create error in reading. To avoid it, every time you put the meter in a water sample, hold and shake it slightly to remove all the bubbles.

    Readings on the same water sample are all over the places and apparently wrong.

    This is caused mainly by bubbles attached to the probe head at time of calibration. Recalibration will most likely resolve the issue.

    Is this water proof?

    The sensor head is water proof, but not the entire body. Please only immerse the head of the meter into water sample. Water should never get to the power/test key level. You can also use the cap as water sample holder.

    Which way should I insert the battery?

    Please note that the positive side of the battery should be pointing OUT.

    How did we get our start?

    Best filter system companion

    Performance and maintenance

    Application

    Enthusiasts

  • Customer Reviews
    No comments
BACK