Hotone Ampero MP-100 Guitar Bass Amp Modeling IR Cabinets Simulation Multi Language Multi-Effects with Expression Pedal Stereo OTG USB Audio Interface

Ampero amp modeler & multi effects processor/pedal is a game changer. It’s heart pounding amp modeling and uber quality effects are powered by the updated CDCM HD and F.I.R.E. system, bringing you the absolute best the world has to offer. Packaged in a cool, thin case with a 4-inch hi-def color touch screen, Ampero delivers allthe real sounds of rock past and present.

EXP 2/FS1/4" TRS input, for connecting an external expression pedal/footswitch controller. Perfect for Hotone Soul Press or Bass Press.Input ModeSelects between input modes optimized for different instruments.a.E.GTElectric Guitar or bassb.A.GTAcoustic guitar or other acoustic instrumentc.LINEKeyboard or synthesizerINPUT1/4" Mono input connection for guitar or other instrument.BALANCED OUTPUTBalanced stereo XLR output connections to mixer or audio interface. For mono output, use only the left balanced output.GND LIFT SwitchTurn the GND LIFT switch ON to cut off the ground connection of the two XLR connectors(Ground Lift) to avoid noise caused by the Ground Loop. Turned OFF, the XLR line will be ground normally.AUX IN1/8" stereo input for connecting external devices (phone, MP3 player) for practice and jamming.PHONES1/8" stereo output for connecting headphonesUNBALANCED OUTPUTUnbalanced 1/4" TS stereo output connections to amplifiers or other equipment. For mono output, use only the left unbalanced output.USBUSB 2.0 Type-B jack for connecting to your computer.Power SwitchTurns power on/off.MIDI INStandard 5-pin MIDI IN for connecting a MIDI controller. Power Supply Connection Power supply input (18V DC center negative)

Ampero can handle up to 9 effect modules simultaneously with its flexible FX1, FX2, FX3 effect modules and editable effect chain for the best effect combination possibilities. More than 240 effects including: 64 amp models/60 cab models/100+ legendary pedal models. Includes user custom IR loader with 3rd party IR support.

Built-in looper with max. 120 seconds recording time. You can choose the position of Looper in your effect chain is pre or post. The phrases you record in the Looper can be synchronized with the drum machine.

Digital Audio Signal Process *24-bit depth, 44.1kHz sample rate *SNR: 120dB *Effects: 242Effects ModulesTotal of 9 simultaneousPatches 198 (99 user patches, 99 factory patches)Looper TimeMono 100 seconds, Stereo 50 secondsInternal Drum Machine100 Rhythm PatternsInputs *One 1/4” Tip Sleeve (TS) Instrument jack, with three way input mode selection *One 1/8” Stereo Auxiliary In (Aux In) jack *One 1/4” Tip Ring Sleeve (TRS) Expression Pedal input jack *One Standard 5 pin MIDI input jackOutputs *Two 1/4” Tip Sleeve (TS) Unbalanced Stereo output jacks *Two XLR Balanced stereo output jacks, with ground lift switch *One 1/8” Stereo headphones output jackInput Impedance *Instrument Input: E.GT: 1MΩ; A.GT: 4.7MΩ; LINE: 10kΩ *Aux In: 10kΩOutput Impedance*Unbalanced Output: 3.2kΩ *Balanced Output: 2kΩ *Headphones: 66ΩScreen4” 800 x 480 Color Dynamic Display Touch ScreenUSB PortUSB 2.0 Type-B port, supports USB Audio 2.0Impulse Response/IR processingSupports 24-bit/44.1kHz Mono WAV files, 1024 pointsPower Requirements18V DC Center NegativeCurrent Consumption500mA MaxDimensions320mm (W) x 147mm (D) x 46mm (H)Weight1408g

Armory

Looper